Electric Gates, Garage Door, Access Control, Smart Home & Security Forums › Gate Automation and Installation Help › Automatic Gates - Help and Support v
Wired up but not working

Thread Rating:
  • 7 Vote(s) - 2.71 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Linear Mode
Wired up but not working
Ranch2 Offline
Junior Member
**
Posts: 13
Threads: 3
Joined: Jun 2022
Reputation: 0
#6
15-11-2022, 07:27 PM (This post was last modified: 15-11-2022, 07:37 PM by Ranch2.)
(14-11-2022, 02:55 PM)Ranch2 Wrote:
(14-11-2022, 02:47 PM)Ranch2 Wrote:
(14-11-2022, 02:46 PM)Ranch2 Wrote:
(14-11-2022, 11:56 AM)Michael Wrote: Hi,

Is it the 230v or 24v control board you have?

Regard
Mike

24 volt i have connected it up as per wiring diagram but does not do anything when switched on if i go to the auto it says the error

here is a picture of the board
Solved this one with a bit of help even though the edge protector is not fitted it needs looped out not only with a wire, but it must have a resistor in the wire to simulate a leading edge.  The solution i used was to connect a leading edge to the terminals and the system was happy and allowed test operation no fault present for leading edge hope this makes sense to all
Find
Reply


Messages In This Thread
Wired up but not working - by Ranch2 - 12-11-2022, 08:23 PM
RE: Wired up but not working - by Michael - 14-11-2022, 11:56 AM
RE: Wired up but not working - by Ranch2 - 14-11-2022, 02:46 PM
RE: Wired up but not working - by Ranch2 - 14-11-2022, 02:47 PM
RE: Wired up but not working - by Ranch2 - 14-11-2022, 02:55 PM
RE: Wired up but not working - by Ranch2 - 15-11-2022, 07:27 PM
RE: Wired up but not working - by CharlesZamora - 17-11-2022, 04:36 PM
RE: Wired up but not working - by SamA - 18-11-2022, 10:02 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Faac photocell stopped working Zeb Gulickx 2 2,644 28-01-2024, 12:56 PM
Last Post: Zeb Gulickx
  Rigel 5 - second keypad stopped working HarefieldHse 1 2,307 03-07-2023, 08:48 AM
Last Post: Michael
Exclamation Proteco Q60A stopped working xCO 0 1,381 19-06-2023, 01:03 PM
Last Post: xCO
  Nice Robus RB100 - Control Board Buttons Not Working sl991 5 5,702 02-12-2022, 02:51 PM
Last Post: JoeF
  Faac 740 - stops working norberto 1 7,953 02-06-2020, 05:15 PM
Last Post: norberto
  Getting motors working together Rich123 0 7,475 22-09-2019, 04:44 PM
Last Post: Rich123
  Daitem Wireless Intercom caller unit not working GemOpy 2 20,287 02-10-2017, 10:47 AM
Last Post: GemOpy
  FAAC 750 Deceleration not working bamforp 1 10,376 20-02-2015, 04:54 PM
Last Post: bamforp
  Gate remotes stopped working Steviev1 1 14,620 03-01-2015, 12:01 PM
Last Post: Blakey111
  keypad no longer working tef 0 6,553 04-09-2014, 09:23 PM
Last Post: tef

Forum Jump:


Users browsing this thread: 2 Guest(s)