Came ZLJ24

[Lyneve]

I am wanting to connect my GSM intercom to the ZLJ24 panel, instructions given are to wire to the Com port and the No port, unable to find these in the panel, 5 wires from controller , Open Pedestrian, Common, Open, AC/+VE  and  AC/GND. Any information would be VERY much appreciated,

[JamieF]

Hi,

I hope you are well. Please see the terminal descriptions below.

Terminals 3 - N/O
Terminals 1 Com

You will need to wire from the relay output on the intercom to the N/O and COM on the ZLJ24 panel. You can see this shown in the manual which i have linked below for you. You will need to refer to page 6/32 on the PDF. Note this will be using the 'Key selector and/or opening button (N.O contact)'.
https://manuals.easygates.co.uk/PDF/misc/ZLJ24.pdf

I hope this has helped.

Kind regards
- Jamie