+- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk)
+-- Forum: Gate Automation and Installation Help (https://www.gateguide.co.uk/forumdisplay.php?fid=1)
+--- Forum: CAME Automatic Gate Openers (https://www.gateguide.co.uk/forumdisplay.php?fid=4)
+--- Thread: Came ZLJ24 (/showthread.php?tid=6849)
Came ZLJ24 - Lyneve - 15-07-2021
I am wanting to connect my GSM intercom to the ZLJ24 panel, instructions given are to wire to the Com port and the No port, unable to find these in the panel, 5 wires from controller , Open Pedestrian, Common, Open, AC/+VE and AC/GND. Any information would be VERY much appreciated,
RE: Came ZLJ24 - JamieF - 16-07-2021
Hi,
I hope you are well. Please see the terminal descriptions below.
Terminals 3 - N/O
Terminals 1 Com
You will need to wire from the relay output on the intercom to the N/O and COM on the ZLJ24 panel. You can see this shown in the manual which i have linked below for you. You will need to refer to page 6/32 on the PDF. Note this will be using the 'Key selector and/or opening button (N.O contact)'.
https://manuals.easygates.co.uk/PDF/misc/ZLJ24.pdf
I hope this has helped.
Kind regards
- Jamie