Lost gate control Logisty

[stableblock]

Hello
I have a set of gates with logisty L5822 entry panel. These have worked fine.
I have been trying to add a new indoor phone/controller L5131? but have managed to stop the gates working either from the existing internal controllers and the keypad.

I have tried the reset keypad *9999*5....#etc but this does nothing.

Anyone got any ideas?

Thanks

Peter

[Mark]

Hello
I have a set of gates with logisty L5822 entry panel. These have worked fine.
I have been trying to add a new indoor phone/controller L5131? but have managed to stop the gates working either from the existing internal controllers and the keypad.

I have tried the reset keypad *9999*5....#etc but this does nothing.

Anyone got any ideas?

Thanks

Peter

As the Logistry System is a Very old and Now Discountinued system the only option would be to replace the whole intercom system for the New Daitem SC902AU as it sounds like a controller problem with your unit

More information on the Daitem Wireless Intercoms can be found on our web site at the following link :

http://www.easygates.co.uk/product_info....ductID=678

[stableblock]

Now sorted it out with help from GM Techtronics
There was a missing wire link in the control box - apparently it will function until reset if this link is removed which it had been but the gates will then dissapear . Replace dthe link and it all sprang into life.