Lost gate control Logisty - Printable Version +- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk) +-- Forum: Gate Automation and Installation Help (https://www.gateguide.co.uk/forumdisplay.php?fid=1) +--- Forum: Automatic Gates - Help and Support (https://www.gateguide.co.uk/forumdisplay.php?fid=20) +--- Thread: Lost gate control Logisty (/showthread.php?tid=4731) |
Lost gate control Logisty - stableblock - 01-07-2012 Hello I have a set of gates with logisty L5822 entry panel. These have worked fine. I have been trying to add a new indoor phone/controller L5131? but have managed to stop the gates working either from the existing internal controllers and the keypad. I have tried the reset keypad *9999*5....#etc but this does nothing. Anyone got any ideas? Thanks Peter RE: Lost gate control Logisty - Mark - 03-07-2012 (01-07-2012, 08:42 PM)stableblock Wrote: Hello As the Logistry System is a Very old and Now Discountinued system the only option would be to replace the whole intercom system for the New Daitem SC902AU as it sounds like a controller problem with your unit More information on the Daitem Wireless Intercoms can be found on our web site at the following link : http://www.easygates.co.uk/product_info.asp?ProductID=678 RE: Lost gate control Logisty - stableblock - 03-07-2012 Now sorted it out with help from GM Techtronics There was a missing wire link in the control box - apparently it will function until reset if this link is removed which it had been but the gates will then dissapear . Replace dthe link and it all sprang into life. |