Login

29-04-2011, 11:34 PM

hi i am currently installing a reigel 5 panel with two swing motors from bft
i have no wireing diagrams and just need to know what connections are made on the panel to power the motors i know motor 1 is 4.5.6 and motor 2 is 7.8.9 also what connections are made at the motors
any help as to these connections would be appreciated

Mark · 09-05-2011, 09:45 AM

The BFT Rigel 5 is a complicated control panel you really need to download the instructions manuals from BFT.com before your try to wire the unit up

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Thalia P - Wireless control board module	mathewnorris22	1	3,666	02-03-2023, 03:17 PM Last Post: SamA
	Er 10 code on RIGEL 6 control unit	Eddiew	1	4,045	05-01-2023, 11:53 AM Last Post: JoeF
	Parallel (or not) gate motors	Ian Evans	1	3,119	16-05-2022, 11:44 AM Last Post: SamA
	LED on control board is off	Arthur_k99	2	11,615	14-04-2020, 01:41 PM Last Post: RyanB
	Identify which BFT motors	Miniman7tm	3	14,358	28-03-2018, 06:26 PM Last Post: Miniman7tm
	BFT LIBRA CONTROL PANEL	neilskeates@gmail.com	7	25,309	16-01-2018, 05:13 PM Last Post: Sav
	BFT Deimos A600 (HAMAL control board) troubleshooting	EnricoTerni63	1	15,799	23-12-2017, 05:38 AM Last Post: TAOZ
	Peccinin remotes with BFT control boards	lemafla	0	6,137	09-01-2017, 09:49 PM Last Post: lemafla
	Remote control never detected by Rigel 5	guyvaio	0	7,141	18-06-2016, 06:17 PM Last Post: guyvaio
	connect Remote control to Arduino	dentalan	4	24,221	30-12-2013, 09:17 PM Last Post: tommysharp