FAAC Eq45s , only Leaf A closing with remote

[Cummil2]

Folks , I have a FAAC E145s driving my 2 leaf gate system ,
I replaced the board after power issue , programmed the remotes , 
Both leafs open if I use the key pad , and only leaf A with the remote ,
Have cleared the master and re done , still no luck,

Any help appreciated

[benbrooks]

Folks , I have a FAAC E145s driving my 2 leaf gate system ,
I replaced the board after power issue , programmed the remotes , 
Both leafs open if I use the key pad , and only leaf A with the remote ,
Have cleared the master and re done , still no luck,

Any help appreciated

Hi,

Thank you for your message.

Could you please advise me on what remotes that you have as there are three different types with different programming methods. You have the LC/RC, SLH/SLH LR and the DS versions, I do not think this will fix the issue but may be worth a try in case the panel is getting its wires crossed when carrying out the programming method; you could try a fresh battery too.

It sounds like you are programming the remotes in a pedestrian mode which is why the remotes only open one leaf.

Many thanks 

Ben