Thread Rating:
  • 4 Vote(s) - 2.25 Average
  • 1
  • 2
  • 3
  • 4
  • 5
FAAC 740 limited travel
#1
when the open/close is activated the gate only travels (in the open or closing) for about 1-2 seconds about 12-18 inches then stops and backs about 2-4 inches.   I can continuously depress the open/close button continuously and the gate with finally travel to fully open or fully closed after several of these short runs. When in the manual unlocked I can easily move the gate fully open and fully closed without any bumps or issue with one hand.
This gate was working great.  then not so great so I reset the controls by depressing F+- and this is all I get: 2 seconds of travel
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  FAAC Eq45s , only Leaf A closing with remote Cummil2 1 666 13-03-2025, 10:06 AM
Last Post: benbrooks
  FAAC Eq45s , only Leaf A closing with remote Cummil2 1 658 13-03-2025, 10:05 AM
Last Post: benbrooks
  FAAC S800 Single swing Gate not responding robhight 0 1,499 18-11-2024, 11:48 AM
Last Post: robhight
  FAAC Configure 443Hz remote to open partially, pause and close Ezylryb 1 1,533 12-08-2024, 03:52 PM
Last Post: Jakedugmore
  FAAC problem dennisoates 0 1,258 30-06-2024, 04:40 PM
Last Post: dennisoates
  Intermittent ‘Stop’ command - FAAC 741 Sliding Gate bwel 3 4,361 22-04-2024, 03:21 PM
Last Post: JoeF
  Faac 415 can't reset from manual to operate mode Stephen Q 1 4,001 18-03-2024, 01:20 PM
Last Post: RXH
  Faac 455d Grantplant 1 4,897 13-11-2023, 11:58 AM
Last Post: Aiden Mitton
  FAAC 400 cbac LN 104202 obey gates 1 9,559 21-11-2022, 09:54 AM
Last Post: SamA
  FAAC gates help - code change from previous owners trekkerglenn 3 8,532 14-11-2022, 12:03 PM
Last Post: benbrooks

Forum Jump:


Users browsing this thread: 1 Guest(s)