Thread Rating:
  • 50 Vote(s) - 3.02 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Liftmaster SCS300K - stop/go
#1
HI all,

I have a pair of Liftmaster SCS300K arms containing drive mechanism to open my gates. Recently, one of the arms started to judder and the shaft turns a bit, stops and then turns a bit more, stops and so on, ie: no continuous screw. As a result the gate does not fully open or close. Its as if the cog teeth in the arm mechanism were not fully engaged or the release mechanism comes on and off. Have opened up and cogs all look fine (pic of release shaft attached) but has not stopped opening completely. Motor runs fine if cogs not engaged. Appreciate any advice.


Attached Files Image(s)
   
Reply
#2
(17-04-2017, 06:05 PM)mtuk100 Wrote: HI all,

I have a pair of Liftmaster SCS300K arms containing drive mechanism to open my gates. Recently, one of the arms started to judder and the shaft turns a bit, stops and then turns a bit more, stops and so on, ie: no continuous screw. As a result the gate does not fully open or close. Its as if the cog teeth in the arm mechanism were not fully engaged or the release mechanism comes on and off. Have opened up and cogs all look fine (pic of release shaft attached) but has not stopped opening completely. Motor runs fine if cogs not engaged. Appreciate any advice.

hi
i think you have make sure that the lead screw and that smal trolley are working fine . usually the nut in trolley after years got big clearance .

regards
Best RegardsĀ 
TomĀ 
Automatic-TC
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  SCS300K Arm Sticking mtuk100 3 186 30-10-2024, 10:17 AM
Last Post: Michael
  Liftmaster MYQ Internet gateway koen_dc 4 19,072 05-10-2024, 01:30 PM
Last Post: Arnold Pow
  Liftmaster LA400 Defender 6 12,916 03-08-2023, 12:26 PM
Last Post: Torantrieb
  odd liftmaster scs300-24 scopie88 3 14,023 13-04-2022, 10:20 AM
Last Post: JoeF
  Liftmaster MYQ Internet Gateway Registration/Connection issues! Carmody 0 13,888 09-03-2021, 02:46 PM
Last Post: Carmody
  Advice on new gate install - LIFTMASTER LYN424 Leeb 1 17,760 22-02-2021, 08:48 PM
Last Post: russ
  Loose gate stop but what wrench to use? bomitie 2 10,821 02-04-2020, 12:06 PM
Last Post: bomitie
  Liftmaster CB1 gates started to open themselves telnet123 4 27,809 01-01-2020, 09:43 AM
Last Post: pronosoft
  Chamberlain Liftmaster gate problem CB1 Armstrong 2 31,760 13-06-2019, 11:46 AM
Last Post: Pop Alexandra
  Liftmaster sliding gate Kar1e 1 17,697 08-08-2017, 11:23 AM
Last Post: Sav

Forum Jump:


Users browsing this thread: 1 Guest(s)