28-02-2009, 12:42 PM
My Fadini PRIT 19 keyswitch seems to have failed but I'm not sure. It has 4 terminals;
1; Common
2; Close
3; Open
4; Stop.
To test the wiring if I conected 1 and 3 wires together outside of the keyswitch should the gates open or is it more complicated than that.
I have connected wires 1 and 3 to a basic one function EasyGates keyswitch but that doesn't work.
The Stop button works on the Fadini OK.
Not sure how to proceed forward, maybe it's not the keyswitch!
1; Common
2; Close
3; Open
4; Stop.
To test the wiring if I conected 1 and 3 wires together outside of the keyswitch should the gates open or is it more complicated than that.
I have connected wires 1 and 3 to a basic one function EasyGates keyswitch but that doesn't work.
The Stop button works on the Fadini OK.
Not sure how to proceed forward, maybe it's not the keyswitch!