Faac 770 455D Gates Auto closing

[framsbottom]

Hi,
I have Faac 770 230v newly installed with 1 set of sensor on the piers. 
I have recently completed wiring same up and have progressed to the Learning process which is completed. I have installed a switch beside the intercom inside and it wired up. 
In have followed the advanced or complete learning on the gates which has worked fine and exited same with pressing F. 
Status on the 2 digit display to the left now shows 3 lines.

Problem is the Gates won't auto close. 

I'm tearing my hair out here. Any help welcome.

[SamA]

Hi,
I have Faac 770 230v newly installed with 1 set of sensor on the piers. 
I have recently completed wiring same up and have progressed to the Learning process which is completed. I have installed a switch beside the intercom inside and it wired up. 
In have followed the advanced or complete learning on the gates which has worked fine and exited same with pressing F. 
Status on the 2 digit display to the left now shows 3 lines.

Problem is the Gates won't auto close. 

I'm tearing my hair out here. Any help welcome.

Hi,

Are the three diagnosis lines horizontal or vertical?

Sam.

[framsbottom]

Hi,
I have Faac 770 230v newly installed with 1 set of sensor on the piers. 
I have recently completed wiring same up and have progressed to the Learning process which is completed. I have installed a switch beside the intercom inside and it wired up. 
In have followed the advanced or complete learning on the gates which has worked fine and exited same with pressing F. 
Status on the 2 digit display to the left now shows 3 lines.

Problem is the Gates won't auto close. 

I'm tearing my hair out here. Any help welcome.

Hi,

Are the three diagnosis lines horizontal or vertical?

Sam.

Hi,

3 are horizontal.

Thanks

Fergal

[Luke Scott]

Hi,
I have Faac 770 230v newly installed with 1 set of sensor on the piers. 
I have recently completed wiring same up and have progressed to the Learning process which is completed. I have installed a switch beside the intercom inside and it wired up. 
In have followed the advanced or complete learning on the gates which has worked fine and exited same with pressing F. 
Status on the 2 digit display to the left now shows 3 lines.

Problem is the Gates won't auto close. 

I'm tearing my hair out here. Any help welcome.

[Luke Scott]

Sound like your in semi auto logic Make sure LO is set to A

[framsbottom]

Sound like your in semi auto logic Make sure LO is set to A

[framsbottom]

Sound like your in semi auto logic Make sure LO is set to A

Yes.I eventually figured same. Thanks for the reply.