Electric Gates, Garage Door, Access Control, Smart Home & Security Forums
Faac 770 455D Gates Auto closing - Printable Version

+- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk)
+-- Forum: Gate Automation and Installation Help (https://www.gateguide.co.uk/forumdisplay.php?fid=1)
+--- Forum: Automatic Gates - Help and Support (https://www.gateguide.co.uk/forumdisplay.php?fid=20)
+--- Thread: Faac 770 455D Gates Auto closing (/showthread.php?tid=6474)

Faac 770 455D Gates Auto closing - framsbottom - 14-04-2019

Hi,
I have Faac 770 230v newly installed with 1 set of sensor on the piers. 
I have recently completed wiring same up and have progressed to the Learning process which is completed. I have installed a switch beside the intercom inside and it wired up. 
In have followed the advanced or complete learning on the gates which has worked fine and exited same with pressing F. 
Status on the 2 digit display to the left now shows 3 lines.

Problem is the Gates won't auto close. 

I'm tearing my hair out here. Any help welcome.

RE: Faac 770 455D Gates Auto closing - SamA - 15-04-2019

(14-04-2019, 12:15 AM)framsbottom Wrote: Hi,
I have Faac 770 230v newly installed with 1 set of sensor on the piers. 
I have recently completed wiring same up and have progressed to the Learning process which is completed. I have installed a switch beside the intercom inside and it wired up. 
In have followed the advanced or complete learning on the gates which has worked fine and exited same with pressing F. 
Status on the 2 digit display to the left now shows 3 lines.

Problem is the Gates won't auto close. 

I'm tearing my hair out here. Any help welcome.


Hi,

Are the three diagnosis lines horizontal or vertical?

Sam.

RE: Faac 770 455D Gates Auto closing - framsbottom - 15-04-2019

(15-04-2019, 09:35 AM)SamA Wrote:
(14-04-2019, 12:15 AM)framsbottom Wrote: Hi,
I have Faac 770 230v newly installed with 1 set of sensor on the piers. 
I have recently completed wiring same up and have progressed to the Learning process which is completed. I have installed a switch beside the intercom inside and it wired up. 
In have followed the advanced or complete learning on the gates which has worked fine and exited same with pressing F. 
Status on the 2 digit display to the left now shows 3 lines.

Problem is the Gates won't auto close. 

I'm tearing my hair out here. Any help welcome.


Hi,

Are the three diagnosis lines horizontal or vertical?

Sam.

Hi,

3 are horizontal.

Thanks

Fergal

RE: Faac 770 455D Gates Auto closing - Luke Scott - 22-04-2020

(14-04-2019, 12:15 AM)framsbottom Wrote: Hi,
I have Faac 770 230v newly installed with 1 set of sensor on the piers. 
I have recently completed wiring same up and have progressed to the Learning process which is completed. I have installed a switch beside the intercom inside and it wired up. 
In have followed the advanced or complete learning on the gates which has worked fine and exited same with pressing F. 
Status on the 2 digit display to the left now shows 3 lines.

Problem is the Gates won't auto close. 

I'm tearing my hair out here. Any help welcome.


RE: Faac 770 455D Gates Auto closing - Luke Scott - 22-04-2020

Sound like your in semi auto logic Make sure LO is set to A

RE: Faac 770 455D Gates Auto closing - framsbottom - 23-04-2020

(22-04-2020, 10:54 PM)Luke Scott Wrote: Sound like your in semi auto logic Make sure LO is set to A


RE: Faac 770 455D Gates Auto closing - framsbottom - 23-04-2020

(23-04-2020, 08:54 AM)framsbottom Wrote:
(22-04-2020, 10:54 PM)Luke Scott Wrote: Sound like your in semi auto logic Make sure LO is set to A
Yes.I eventually figured same. Thanks for the reply.