10-06-2019, 03:53 PM
Hi. I have a faac system with 402 motors. It's been trouble free for over 15 years. Yesterday it started playing up on one side ( the gate that closes first). It goes out of sequence, and when it hits the 'gate closed' stop it immediately opens again. It always stops on the gate open stop. ( Gates set to open with press of of remote then remain open, and close with another press of remote).
If I hold the problem gate closed and wait for the locking gate to close, the motors time out and it sits there closed. When I press open, the 'problem gate' immediately tries to open. It then quickly goes into close ( because the locking gate hadn't quite opened yet) then into open, and stops on the 'open' stop.
With both gates open they sometimes close together ( but the problem gate tries to open again - the locking gate holds it closed).
Sometimes the problem gate doesn't close at first press and we have one remaining opening as the other closes!
Any ideas welcomed!
If I hold the problem gate closed and wait for the locking gate to close, the motors time out and it sits there closed. When I press open, the 'problem gate' immediately tries to open. It then quickly goes into close ( because the locking gate hadn't quite opened yet) then into open, and stops on the 'open' stop.
With both gates open they sometimes close together ( but the problem gate tries to open again - the locking gate holds it closed).
Sometimes the problem gate doesn't close at first press and we have one remaining opening as the other closes!
Any ideas welcomed!
