+- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk)
+-- Forum: Member Discussions (https://www.gateguide.co.uk/forumdisplay.php?fid=33)
+--- Forum: Introduce Yourself (https://www.gateguide.co.uk/forumdisplay.php?fid=34)
+--- Thread: FAAC 402 (/showthread.php?tid=6499)
FAAC 402 - Tom France - 10-06-2019
Hi. I have a faac system with 402 motors. It's been trouble free for over 15 years. Yesterday it started playing up on one side ( the gate that closes first). It goes out of sequence, and when it hits the 'gate closed' stop it immediately opens again. It always stops on the gate open stop. ( Gates set to open with press of of remote then remain open, and close with another press of remote).
If I hold the problem gate closed and wait for the locking gate to close, the motors time out and it sits there closed. When I press open, the 'problem gate' immediately tries to open. It then quickly goes into close ( because the locking gate hadn't quite opened yet) then into open, and stops on the 'open' stop.
With both gates open they sometimes close together ( but the problem gate tries to open again - the locking gate holds it closed).
Sometimes the problem gate doesn't close at first press and we have one remaining opening as the other closes!
Any ideas welcomed!
RE: FAAC 402 - Tom France - 10-06-2019
Then we get one opening as the other closes. I have to hold one closed to try and get the sequence back..