Wiring relay to CB24
|
Wiring relay to CB24
|
23-07-2012, 09:42 AM
(20-07-2012, 12:06 PM)magga Wrote: Hi Mark, If it is a voltage free output from the unit the wire it accross the Open and common connectors on right hand side for the board and that will trigger the gate every time those contacts are switched. |
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Wiring relay to CB24 - by magga - 18-07-2012, 10:38 PM
RE: Wiring relay to CB24 - by Mark - 20-07-2012, 10:34 AM
RE: Wiring relay to CB24 - by magga - 20-07-2012, 12:06 PM
RE: Wiring relay to CB24 - by Mark - 23-07-2012, 09:42 AM
RE: Wiring relay to CB24 - by magga - 01-08-2012, 06:35 PM
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
| CB24 delay to close random fault | stuartdsutton | 0 | 8,693 |
23-09-2015, 11:38 AM Last Post: stuartdsutton |
|
|
Chamberlin Liftmaster Professional (CB24 & dual LYN400.24v) | SDL | 4 | 29,758 |
29-12-2013, 02:26 PM Last Post: Tussun |
| Liftmaster Professional CB24 / LYN400 24v - RPM Reversal Error | jrhodes310 | 1 | 13,477 |
20-08-2012, 09:40 AM Last Post: Mark |
|
| cb24 photocells | devonaloan | 1 | 11,642 |
28-11-2011, 05:57 PM Last Post: Mark |
|
| Liftmaster CB24 key switch | Mel1962 | 2 | 16,300 |
25-10-2011, 09:52 PM Last Post: Mel1962 |
|
| CB24 Problems | andydday | 3 | 19,082 |
06-02-2011, 11:39 AM Last Post: Guest |
|
| CB24 Kit with a single set of photocells | JD1765 | 1 | 19,259 |
07-06-2010, 10:04 AM Last Post: easygates |
|
| CB24 / EasyBKA | cliff finch | 2 | 14,999 |
25-03-2010, 09:25 PM Last Post: cliff finch |
|
| CB24 Stopped Responding | TimL | 5 | 24,850 |
19-11-2009, 05:22 PM Last Post: adambrown81 |
|
| Wiring Photocells on the CB11 control board | Sparky | 2 | 22,770 |
28-06-2009, 10:19 PM Last Post: Sparky |
|
