10-05-2024, 04:35 PM
(10-05-2024, 03:47 PM)P100D Wrote:(15-05-2023, 11:25 AM)Nemen3242 Wrote: Hello
I solved the problem. When i connected the door station directly to the gate it never worked. I suspect as I said about the feature i mentioned above. To mitigate, i stopped connecting it directly. I connected to door station to hikvision access control unit as an exit button. And linked that exit button as an alarm out. Now it is working flawlessly
Hello! Could someone please help me with this? I have the exact same issue, however I don't have a hikvision access control unit and have no intention to buy one.
Basically, I connected a hikvision relay DS-PM1-O1L-WE to the SBS contacts, I power the relay via STOP and PP as shown in the manual. I do not understand why the opening works when I close the relay via the Hikvision AX Pro where the relay is enrolled, but it only close half a meter or something and than goes to full open again. I tried all settings in advanced settings for SBS (Open - Close - Open - Close etc) to no availability.
I need this to be able to open the gate remotely if needed. The only way to overcome the problem is to set the automatic close to ON. That way it will close on its own.
Also on a separate issue I need to program a puertamatic remote with N600, and it doesn't work directly as it does with the Nice remote. Could not find any links or help anywhere.
I would really appreciate your help!
Thank you!
Try this. This should also help https://www.shelly.com/en-gb/products/pr...lly-plus-1
As far as I understand, if it is not a dry contact but a wet contact, SBS struggles. DS-PM1-O1L-WE is probably wet contact as well. Shell 1 Plus is cheap and does only dry contact. it will connect to your wifi. no additional device needed and give you your mobile control.