(10-10-2022, 09:58 AM)j1000 Wrote: Hi Joe,
Many thanks for your and Sams help and apologies for any confusion.
I would like the gate to open which it currently does via my Hik-connect app and the indoor door station.
Connected via No and Com ( Outdoor doorstation) to Robus 600 (Sbs).
The robus remote does the same function. When i press the button the gate opens and if i press it again the gate closes.
The following is what I would like it to do in addtion to the above.
I would like to be able to close the gate via the Hik-connect app and the indoor station.
Currently what happens is that the gate attempts to close (when fully open) but it only moves the gate say 1m then it reopens. This is when I press the same button on my app which causes the gate to close.
Appreciate any advice.
NB: I am not sure if this has got anything to do with it but at the moment, when I press the 2nd button on the Robus remote fob, the gate gives a 1m opening. (Pedesterian access). I dont really need this function but I was asking if you thought this could be a problem.
Thanks again. Your expertise is most appreciated.
Hello
I have the same problem:
Currently what happens is that the gate attempts to close (when fully open) but it only moves the gate say 1m then it reopens. This is when I press the same button on my app which causes the gate to close.
Were you able to find a solution? I suspect it is due to the “always open” feature. Which i am not sure if it can be disabled