29-03-2021, 09:50 AM
My apologies Stephen. It looks like the photocells were used as a device to open the gates when approached. This would also open the gates while they were closing. Revising what I have advised previously you will have a green and white wire going into 9 and 14. The wire going into 9 would need to be moved to 12 and 14.
Wiring diagram for 1 x Closing Photocells:
If you already have closing photocells wired into these terminals you will need to wire these as shown in the image below.
Wiring diagram for 2x Closing Photocells:
Wiring diagram for 1 x Closing Photocells:
If you already have closing photocells wired into these terminals you will need to wire these as shown in the image below.
Wiring diagram for 2x Closing Photocells:
Gate Automation and Access Control from EasyGates Retail Store
EasyGates Trade Store for Trade only
Smart Home Tech from The Smart and Secure Centre
Smart Home News from Smart Home Matters
EasyGates Trade Store for Trade only
Smart Home Tech from The Smart and Secure Centre
Smart Home News from Smart Home Matters