Thread Rating:
  • 9 Vote(s) - 3.44 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Genius board (FAAC) help
#1
Hi forum,

My Genius board has no power going to it. I checked the mains supply in and its live but nothing on the control board. It looks like the board in the back of the box has gone. Does anybody not what part this is? It's not the control board, its the board behind that one.

Thanks
Sam
[Image: 565KFWQ]

Image of the board: https://ibb.co/565KFWQ
Reply
#2
(07-03-2020, 02:38 PM)Kingkelly77 Wrote: Hi forum,

My Genius board has no power going to it. I checked the mains supply in and its live but nothing on the control board. It looks like the board in the back of the box has gone. Does anybody not what part this is? It's not the control board, its the board behind that one.

Thanks
Sam
[Image: 565KFWQ]

Image of the board: https://ibb.co/565KFWQ

Hi,
Hope you are well,

do you have the model number of this board it should be printed on the board somewhere or on the board transformer.

it may state 455D.

please provide.

if there has been an electrical short on any of the panel it may have caused damage to the actual main PCB meaning the board will need to be replaced.

have you also checked the panel fuses.

Regards Joe
EasyGates.co.uk - EasyGates Ltd
 
EasyGates Direct - Trade only accounts.

Smart and Secure Center - Smart Home Products
Reply
#3
(07-03-2020, 02:38 PM)Kingkelly77 Wrote: Hi forum,

My Genius board has no power going to it. I checked the mains supply in and its live but nothing on the control board. It looks like the board in the back of the box has gone. Does anybody not what part this is? It's not the control board, its the board behind that one.

Thanks
Sam
[Image: 565KFWQ]

Image of the board: https://ibb.co/565KFWQ

Probably a slug on the back of the board. You could remove the board out the cabinet and look on the rear. Ensure the power is off!!!!

Access Control Ltd 
0333 5776227
Reply
#4
(07-03-2020, 02:38 PM)Kingkelly77 Wrote: Hi forum,

My Genius board has no power going to it. I checked the mains supply in and its live but nothing on the control board. It looks like the board in the back of the box has gone. Does anybody not what part this is? It's not the control board, its the board behind that one.

Thanks
Sam
[Image: 565KFWQ]

Image of the board: https://ibb.co/565KFWQ
Hi,
out of curiosity have you checked the fuses on the board at all?
EasyGates.co.uk - EasyGates Ltd
 
EasyGates Direct - Trade only accounts.

Smart and Secure Center - Smart Home Products
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  FAAC S800 Single swing Gate not responding robhight 0 60 18-11-2024, 11:48 AM
Last Post: robhight
  Genius Ja592 - repeated failures john@worldhq.com 0 711 22-08-2024, 08:49 AM
Last Post: john@worldhq.com
  FAAC Configure 443Hz remote to open partially, pause and close Ezylryb 1 1,014 12-08-2024, 03:52 PM
Last Post: Jakedugmore
  FAAC problem dennisoates 0 822 30-06-2024, 04:40 PM
Last Post: dennisoates
  Intermittent ‘Stop’ command - FAAC 741 Sliding Gate bwel 3 2,548 22-04-2024, 03:21 PM
Last Post: JoeF
  Faac 415 can't reset from manual to operate mode Stephen Q 1 3,203 18-03-2024, 01:20 PM
Last Post: RXH
  Faac 455d Grantplant 1 4,114 13-11-2023, 11:58 AM
Last Post: Aiden Mitton
  FAAC 740 limited travel LoneStarCycler 0 4,251 24-06-2023, 01:06 AM
Last Post: LoneStarCycler
  FAAC 400 cbac LN 104202 obey gates 1 9,059 21-11-2022, 09:54 AM
Last Post: SamA
  FAAC gates help - code change from previous owners trekkerglenn 3 7,698 14-11-2022, 12:03 PM
Last Post: benbrooks

Forum Jump:


Users browsing this thread: 2 Guest(s)