Dip switch Profil 100

[hwjr_easygates]

Hi,

I have one of the original CDVI Profil 100 boxes.

My 12/24V jumper is missing and there are 3 contacts, how are these bridged (1,2,3 or 1,2 or 2,3) ?

Also it says:
(Do not use the latched output in 24V!)

Does this mean the power powering the relay, or 24V being switched going through the relay?

I would like to run the box on 24V and switch 12dc or 220ac with it NC.


Thanks for any replies!

[Blakey111]

I think I Spoke to you over the phone the other day. Did you manage to get this programmed up as discussed?
Kindest Regards,
Dave

Hi,

I have one of the original CDVI Profil 100 boxes.

My 12/24V jumper is missing and there are 3 contacts, how are these bridged (1,2,3 or 1,2 or 2,3) ?

Also it says:
(Do not use the latched output in 24V!)

Does this mean the power powering the relay, or 24V being switched going through the relay?

I would like to run the box on 24V and switch 12dc or 220ac with it NC.


Thanks for any replies!

[hwjr_easygates]

Yes all is fine now! Thanks