+- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk)
+-- Forum: Access Control (https://www.gateguide.co.uk/forumdisplay.php?fid=30)
+--- Forum: Digital Keypads (https://www.gateguide.co.uk/forumdisplay.php?fid=14)
+--- Thread: Dip switch Profil 100 (/showthread.php?tid=4894)
Dip switch Profil 100 - hwjr_easygates - 22-09-2013
Hi,
I have one of the original CDVI Profil 100 boxes.
My 12/24V jumper is missing and there are 3 contacts, how are these bridged (1,2,3 or 1,2 or 2,3) ?
Also it says:
(Do not use the latched output in 24V!)
Does this mean the power powering the relay, or 24V being switched going through the relay?
I would like to run the box on 24V and switch 12dc or 220ac with it NC.
Thanks for any replies!
RE: Dip switch Profil 100 - Blakey111 - 26-09-2013
I think I Spoke to you over the phone the other day. Did you manage to get this programmed up as discussed?
Kindest Regards,
Dave
(22-09-2013, 11:26 AM)hwjr_easygates Wrote: Hi,
I have one of the original CDVI Profil 100 boxes.
My 12/24V jumper is missing and there are 3 contacts, how are these bridged (1,2,3 or 1,2 or 2,3) ?
Also it says:
(Do not use the latched output in 24V!)
Does this mean the power powering the relay, or 24V being switched going through the relay?
I would like to run the box on 24V and switch 12dc or 220ac with it NC.
Thanks for any replies!
RE: Dip switch Profil 100 - hwjr_easygates - 26-09-2013
Yes all is fine now! Thanks