16-02-2025, 05:16 PM
Hello and thank you for accepting me to the forum!
I am hoping to get some help with a slaiding gate opener our house has. We bought the house with the gate system installed and there is no documentation with it unfortunately.
During summertime the gate mostly works without problems, but when it gets cold outside it starts to act up and currently it is basically in a non-working state, refusing to move or apply reset to the system.
I have tried to picture search NICE motors to find out what motor I have and I have come up with that it might be a ROBO RO 1124, but I am not completely 100% sure of course. The led "OK" is flashing some error codes I believe, but I cannot read them as I do not have any info about the codes, I have not been able to find a repair manual or anything else that would explain errors. If someone could share me one, that would be super!
I have been able to find a user manual of some sort, that has some basic info about the device where I see that this motor reads shaft rotations to measure distance it needs to travel for open and close functions and I have started thinking maybe the optical sensors are dirty or do not like cold conditions and therefore don't work properly and halt motor movement as soon as it starts. I have looked on spare parts diagram of the device, but I am not able to see any optical sensors or their locations, so this is a bit confusing.
Thanks for reading and kindly please advise if I might be on right track, or completely wrong and if someone could read the error message the led is trying to tell, that would be awesome!
I will link here some photos of the motor and its logic board and a video that shows the led flashing:
https://www.dropbox.com/scl/fi/ecifjkkzb...o4wpu&dl=0
https://www.dropbox.com/scl/fi/z3rux6n6y...lb6a6&dl=0
https://www.dropbox.com/scl/fi/x2ergkhs8...5fsvt&dl=0
https://www.dropbox.com/scl/fi/2z8982z8c...g9bq7&dl=0
https://www.dropbox.com/scl/fi/4k3zjgutp...7gmwx&dl=0
https://www.dropbox.com/scl/fi/bjmnh0396...a9dph&dl=0
I am hoping to get some help with a slaiding gate opener our house has. We bought the house with the gate system installed and there is no documentation with it unfortunately.
During summertime the gate mostly works without problems, but when it gets cold outside it starts to act up and currently it is basically in a non-working state, refusing to move or apply reset to the system.
I have tried to picture search NICE motors to find out what motor I have and I have come up with that it might be a ROBO RO 1124, but I am not completely 100% sure of course. The led "OK" is flashing some error codes I believe, but I cannot read them as I do not have any info about the codes, I have not been able to find a repair manual or anything else that would explain errors. If someone could share me one, that would be super!
I have been able to find a user manual of some sort, that has some basic info about the device where I see that this motor reads shaft rotations to measure distance it needs to travel for open and close functions and I have started thinking maybe the optical sensors are dirty or do not like cold conditions and therefore don't work properly and halt motor movement as soon as it starts. I have looked on spare parts diagram of the device, but I am not able to see any optical sensors or their locations, so this is a bit confusing.
Thanks for reading and kindly please advise if I might be on right track, or completely wrong and if someone could read the error message the led is trying to tell, that would be awesome!
I will link here some photos of the motor and its logic board and a video that shows the led flashing:
https://www.dropbox.com/scl/fi/ecifjkkzb...o4wpu&dl=0
https://www.dropbox.com/scl/fi/z3rux6n6y...lb6a6&dl=0
https://www.dropbox.com/scl/fi/x2ergkhs8...5fsvt&dl=0
https://www.dropbox.com/scl/fi/2z8982z8c...g9bq7&dl=0
https://www.dropbox.com/scl/fi/4k3zjgutp...7gmwx&dl=0
https://www.dropbox.com/scl/fi/bjmnh0396...a9dph&dl=0