+- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk)
+-- Forum: Gate Automation and Installation Help (https://www.gateguide.co.uk/forumdisplay.php?fid=1)
+--- Forum: Nice Gate Openers (https://www.gateguide.co.uk/forumdisplay.php?fid=22)
+--- Thread: Nice RB600 - Automatic close fail and opening issues (/showthread.php?tid=7295)
Nice RB600 - Automatic close fail and opening issues - P100D - 29-09-2024
Hello,
Hope everyone is doing fine.
I have a Robus RB600 gate and have 2 issues I'd need help with.
1. The automatic close is enabled, however it only works if nothing passes through the gate during that time. If a car or a person breaks the the photo beam during this time, it will not auto close anymore...
2. During the opening, if a car passes before the gate is fully opened, the door halts at that point, and will not continue to open as it should. tried various settings w/o any success.
I would really appreciate any help with this.
Many thanks in advance!
RE: Nice RB600 - Automatic close fail and opening issues - P100D - 30-09-2024
Bump up! 38 views and no answer....Would really appreciate any help with these issues, Thanks!
RE: Nice RB600 - Automatic close fail and opening issues - nicenotnice - 09-12-2024
Did you solve this issue? currently facing the same problem
RE: Nice RB600 - Automatic close fail and opening issues - P100D - 09-12-2024
(09-12-2024, 09:17 AM)nicenotnice Wrote: Did you solve this issue? currently facing the same problem
Unfortunately not yet. But I realized this place is a place for questions NOT answers…
RE: Nice RB600 - Automatic close fail and opening issues - Michael - 09-12-2024
Hi,
The board is receiving a second command. If you could call through to the number below, we can assist you on this.
01384569942
Regards
Easygates Ltd
RE: Nice RB600 - Automatic close fail and opening issues - nicenotnice - 10-12-2024
(09-12-2024, 09:45 AM)P100D Wrote:(09-12-2024, 09:17 AM)nicenotnice Wrote: Did you solve this issue? currently facing the same problem
Unfortunately not yet. But I realized this place is a place for questions NOT answers…
Have you tried to connect to SBS and programming in apartment block? tried and it works for us.
RE: Nice RB600 - Automatic close fail and opening issues - P100D - 10-12-2024
(09-12-2024, 12:45 PM)Michael Wrote: Hi,
The board is receiving a second command. If you could call through to the number below, we can assist you on this.
01384569942
Regards
Easygates Ltd
Thanks, appreciate the offer. I was hoping to get the info (which seems to be trivial to an experienced gate installer) here, w/o paying for it, that is why I posted the screenshots of my configuration...
Best!