New member

[matp]

Hi.  New here.  Found this forum on search and seems to be one of the best resources online for automated gate topics. 

Bought a house last year with a "Nice" Robus RB600/A gate motor.

Found/read the installation manual and lots of youtube videos...but missing maintenance info stuff you would usually find in a service manual (disassembly/re-greasing, etc).

In particular, the stupid deep screw (that always gets corroded) holding on the motor cover... I know I likely have to drill this out (the motor is from 2014 and boroscope shows what you would expect).... but before I do that, can someone tell me what type of screw head this was original?  Allen head, phillips, pozidrive, torx, etc...and what size?  Would rather take a crack at unscrewing it with the right bit prior to taking a drill to it.

Thanks!

-Matt

[benbrooks]

Hi.  New here.  Found this forum on search and seems to be one of the best resources online for automated gate topics. 

Bought a house last year with a "Nice" Robus RB600/A gate motor.

Found/read the installation manual and lots of youtube videos...but missing maintenance info stuff you would usually find in a service manual (disassembly/re-greasing, etc).

In particular, the stupid deep screw (that always gets corroded) holding on the motor cover... I know I likely have to drill this out (the motor is from 2014 and boroscope shows what you would expect).... but before I do that, can someone tell me what type of screw head this was original?  Allen head, phillips, pozidrive, torx, etc...and what size?  Would rather take a crack at unscrewing it with the right bit prior to taking a drill to it.

Thanks!

-Matt

Hi,

Thank you for your message.

The screw that holds on the cover for the control panel on the motor is a Allen head.

Many thanks
Ben