Stressing over BFT Rigel 6 Help please

[Vaf888]

Hi Guys

Hope someone can help.  Long and short a slug blow up rigel 6 board 

Got a replacement of ebay.  No error codes.  I have set it back to default.  

Issue is I can't get any gate movement from the autoset program.  I follow the instructions and the displays NLo and the KO.

No steps at all.  I am just considered the slug has knackered the motors also.  Motors are sub r

Thanks in advance

[JoeF]

Hi Guys

Hope someone can help.  Long and short a slug blow up rigel 6 board 

Got a replacement of ebay.  No error codes.  I have set it back to default.  

Issue is I can't get any gate movement from the autoset program.  I follow the instructions and the displays NLo and the KO.

No steps at all.  I am just considered the slug has knackered the motors also.  Motors are sub r

Thanks in advance

Hi,

Potentially but not necessarily.  are the motors attempting to move but not moving; are you selecting the correct motor type during the set up?

Joe

[Vaf888]

[quote pid="18067" dateline="1724149881"]
Hi Joe

Apologies for only responding now.  I got the panel repaired.  It has been working great, until yesterday.  It is showing a PHCL error on the display.  I think this is to do with the photocells.

Can you help at all.  One set is the BFT Desme and the set attached to the Wall are BFT FL130B PHOTOCELLS

Many thanks

[/quote]

[Vaf888]

[quote pid="18067" dateline="1724149881"]
Hi Joe

Apologies for only responding now.  I got the panel repaired.  It has been working great, until yesterday.  It is showing a PHCL error on the display.  I think this is to do with the photocells.

Can you help at all.  One set is the BFT Desme and the set attached to the Wall are BFT FL130B PHOTOCELLS

Many thanks

[/quote]

update.

I opened up the photocells to check for any debris or damage.  Both sets seem to be working OK.  Getting a click when the beam is broken.  Still no change on the display.

Thanks