BFT Deimos BT A600 fault Error 10
|
BFT Deimos BT A600 fault Error 10
|
23-05-2021, 03:28 PM
I have an error 10 on BFT Deimos BT A 600. Manual states possible motor opening/closing
Contacts are seized. Can any member advise where new relays for BFT Merak 600 can be purchased. Relays are WGR 24vdc. RD - 124D - H1. H2023J Thanks in advance for any assistance, 
24-05-2021, 10:12 AM
(23-05-2021, 03:28 PM)Airbus330/300 Wrote: I have an error 10 on BFT Deimos BT A 600. Manual states possible motor opening/closing Hi, hope you are well, unfortunately you cannot purchase this part as a spare and therefore a new control panel will need to be purchased on this occasion Regards Joe
EasyGates.co.uk - EasyGates Ltd
EasyGates Direct - Trade only accounts. Smart and Secure Center - Smart Home Products
25-05-2021, 08:28 PM
(24-05-2021, 10:12 AM)JoeF Wrote:(23-05-2021, 03:28 PM)Airbus330/300 Wrote: I have an error 10 on BFT Deimos BT A 600. Manual states possible motor opening/closing Hi Joe, Thank you for the prompt reply. When testing resistance reading with a multimeter on the motor on BFT Deimos Ultra BT A600, what should be the resistance reading be? Many Thanks Regards Gerry
04-03-2024, 08:51 PM
(25-05-2021, 08:28 PM)Airbus330/300 Wrote:(24-05-2021, 10:12 AM)JoeF Wrote:(23-05-2021, 03:28 PM)Airbus330/300 Wrote: I have an error 10 on BFT Deimos BT A 600. Manual states possible motor opening/closing Hi, i found your message here about BFT Deimos BT A 600 ERROR 10, Can you please tell me was was the fix? since i have exactly the same error now  Thanks
05-03-2024, 04:31 PM
(04-03-2024, 08:51 PM)GateOpe Wrote:(25-05-2021, 08:28 PM)Airbus330/300 Wrote:(24-05-2021, 10:12 AM)JoeF Wrote:(23-05-2021, 03:28 PM)Airbus330/300 Wrote: I have an error 10 on BFT Deimos BT A 600. Manual states possible motor opening/closing Hi, Error 10 is indicative of the following faults... ER10 (BT motor) Motor 1 relay running faulty test - Motor 1 relay running control circuit failure - Relay with stuck contacts - Short circuit mosfet - Check and remove the causes of possible high absorption of motor 1 - Reparation: replacement of shunt resistance, relay control circuit components, mosfet It could be any of the following issues which may require replacing the faulty item. Joe
EasyGates.co.uk - EasyGates Ltd
EasyGates Direct - Trade only accounts. Smart and Secure Center - Smart Home Products
06-03-2024, 11:59 AM
(05-03-2024, 04:31 PM)JoeF Wrote:(04-03-2024, 08:51 PM)GateOpe Wrote:(25-05-2021, 08:28 PM)Airbus330/300 Wrote:(24-05-2021, 10:12 AM)JoeF Wrote:(23-05-2021, 03:28 PM)Airbus330/300 Wrote: I have an error 10 on BFT Deimos BT A 600. Manual states possible motor opening/closing Hi, I already replaced the PCB and unfortunately the error still occur (probably the new PCB also damaged!). Motor was tested with 24v transformer and it was working without any issues what else i can check? |
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
| Deimos ultra bt a400 Gate to stay open | Sootylfc | 0 | 249 |
04-11-2024, 05:59 PM Last Post: Sootylfc |
|
| Deimos ultra bt a400 gate - not working with fobs | Sootylfc | 2 | 684 |
15-10-2024, 10:37 AM Last Post: Sootylfc |
|
| bft deimos ultra bt600 error f1 | pfloyd | 4 | 1,108 |
04-10-2024, 03:36 PM Last Post: pfloyd |
|
| Question BFT Deimos A400 | Makaroni | 0 | 730 |
15-05-2024, 08:05 AM Last Post: Makaroni |
|
| BFT deimos smoke from board | stanli200188 | 1 | 1,874 |
05-03-2024, 04:17 PM Last Post: JoeF |
|
| thalia error code 3h 35/37/38 | detritus | 1 | 3,400 |
05-01-2023, 11:54 AM Last Post: SamA |
|
| Lux/Thalia P ersl error | Dava12 | 0 | 3,041 |
13-12-2021, 09:35 PM Last Post: Dava12 |
|
| BFT Submotor fault | Rockford | 0 | 4,463 |
18-05-2020, 09:42 PM Last Post: Rockford |
|
| ERROR 11 | TheoLouloudis | 0 | 9,608 |
10-09-2019, 08:52 PM Last Post: TheoLouloudis |
|
| BFT Deimos Ultra remote problems | shaggy | 1 | 12,207 |
01-05-2019, 09:43 PM Last Post: ok.dude |
|
