Thread Rating:
  • 1 Vote(s) - 1 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Difference: SCS300, LYN300, and LYN400?
#1
Hi all.

As the title :-)

All being 24 volt versions, what is the actual difference between them? I know that the SCS has the slung-under screw rod, and the LYNs are extending 'rams', but what difference does this make in practice? Is one better than the other?

And will they all work from the same board, the CB124?

Many thanks.
Reply
#2
(18-02-2023, 08:59 PM)DevsAd Wrote: Hi all.

As the title :-)

All being 24 volt versions, what is the actual difference between them? I know that the SCS has the slung-under screw rod, and the LYNs are extending 'rams', but what difference does this make in practice? Is one better than the other?

And will they all work from the same board, the CB124?

Many thanks.

Hi,

They all work on the CB124ev board. The SCS300-24 is a worm drive motor where as they LYN is a telescopic. The SCS300 and LYN300 can go up to 3m leafs and the LYN400 is up to a 4m leaf.

Please also be aware that they have all been discontinued now and have been replaced by the LA300/LA4000.

Sam.
EasyGates.co.uk - EasyGates Ltd
 
EasyGates Direct - Trade only accounts.

Smart and Secure Center - Smart Home Products
Reply
#3
(23-02-2023, 01:08 PM)SamA Wrote:
(18-02-2023, 08:59 PM)DevsAd Wrote: Hi all.

As the title :-)

All being 24 volt versions, what is the actual difference between them? I know that the SCS has the slung-under screw rod, and the LYNs are extending 'rams', but what difference does this make in practice? Is one better than the other?

And will they all work from the same board, the CB124?

Many thanks.

Hi,

They all work on the CB124ev board. The SCS300-24 is a worm drive motor where and best fat burner for men as they LYN is a telescopic. The SCS300 and LYN300 can go up to 3m leafs and the LYN400 is up to a 4m leaf.

Please also be aware that they have all been discontinued now and have been replaced by the LA300/LA4000.

Sam.

I was unaware of this that they have been replaced by the LA300/LA4000. Thanks for this information.
Reply
#4
(28-02-2023, 04:05 PM)softheartedSophiya Wrote:
(23-02-2023, 01:08 PM)SamA Wrote:
(18-02-2023, 08:59 PM)DevsAd Wrote: Hi all.

As the title :-)

All being 24 volt versions, what is the actual difference between them? I know that the SCS has the slung-under screw rod, and the LYNs are extending 'rams', but what difference does this make in practice? Is one better than the other?

And will they all work from the same board, the CB124?

Many thanks.

Hi,

They all work on the CB124ev board. The SCS300-24 is a worm drive motor where as they LYN is a telescopic. The SCS300 and LYN300 can go up to 3m leafs and the LYN400 is up to a 4m leaf.

Please also be aware that they have all been discontinued now and have been replaced by the LA300/LA4000.

Sam.

I was unaware of this that they have been replaced by the LA300/LA4000. Thanks for this information.
 No problem Smile
EasyGates.co.uk - EasyGates Ltd
 
EasyGates Direct - Trade only accounts.

Smart and Secure Center - Smart Home Products
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  odd liftmaster scs300-24 scopie88 3 14,425 13-04-2022, 10:20 AM
Last Post: JoeF
  Lyn300 lubrication Capricious 5 11,939 08-06-2021, 12:37 PM
Last Post: Capricious
Exclamation lift master SCS300 - photocells Willow 1 11,270 14-07-2016, 09:16 PM
Last Post: Willow
Exclamation lift master SCS300 - photocells Willow 0 8,398 13-07-2016, 11:19 AM
Last Post: Willow
  Opening delay on SCS300 (CB124 board) willows79 0 9,027 02-12-2015, 09:45 PM
Last Post: willows79
Rolleyes Chamberlin Liftmaster Professional (CB24 & dual LYN400.24v) SDL 4 29,798 29-12-2013, 02:26 PM
Last Post: Tussun
  LYN300/400 thermiclance 0 7,688 29-10-2012, 08:58 AM
Last Post: thermiclance
  Liftmaster Professional CB24 / LYN400 24v - RPM Reversal Error jrhodes310 1 13,497 20-08-2012, 09:40 AM
Last Post: Mark
  lyn300 control panel andy15 1 13,023 13-12-2011, 09:59 AM
Last Post: Mark
  LYN300 Diagnostic light flashing 6 times jeff 3 17,370 02-12-2011, 12:24 PM
Last Post: Mark

Forum Jump:


Users browsing this thread: 2 Guest(s)