Login

15-04-2017, 07:39 PM

Hi,

I am having a problem with my FAAC gates (245 board). The issue is that the gates will automatically open on their own about 5-8 seconds after they are closed. It seems to be that if the gates have been open for a while (over half an hour) then they will not reopen on closing. However, if you open the gates, go through, and then close them, they will reopen. You have to repeat the process another 1-2 times until they decide to remain closed. The temperamental nature of it is a real head-scratcher.

Any ideas what could be causing this? The photocells aren't configured at the moment but I don't believe this would be the cause.

Any help massively appreciated!

gate-keeper · 13-10-2021, 04:47 PM

(15-04-2017, 07:39 PM)hi did you ever get this fixed, as i also have the same issue on a differnt board (BFT Libra ) my pair gates open again right away when they come to close and straight after a "Start" is sent to the board and the gates open? photocells all work as intended any help appreciated Wrote: Hi,

I am having a problem with my FAAC gates (245 board). The issue is that the gates will automatically open on their own about 5-8 seconds after they are closed. It seems to be that if the gates have been open for a while (over half an hour) then they will not reopen on closing. However, if you open the gates, go through, and then close them, they will reopen. You have to repeat the process another 1-2 times until they decide to remain closed. The temperamental nature of it is a real head-scratcher.

Any ideas what could be causing this? The photocells aren't configured at the moment but I don't believe this would be the cause.

Any help massively appreciated!

lcpbarbosa · 30-07-2023, 12:30 PM

(13-10-2021, 04:47 PM)Hi,I having this same problem with faac 245 board. Did you guys found out the solution? Thanks in advancegate-keeper Wrote:
(15-04-2017, 07:39 PM)hi did you ever get this fixed, as i also have the same issue on a differnt board (BFT Libra ) my pair gates open again right away when they come to close and straight after a "Start" is sent to the board and the gates open? photocells all work as intended any help appreciated Wrote: Hi,

I am having a problem with my FAAC gates (245 board). The issue is that the gates will automatically open on their own about 5-8 seconds after they are closed. It seems to be that if the gates have been open for a while (over half an hour) then they will not reopen on closing. However, if you open the gates, go through, and then close them, they will reopen. You have to repeat the process another 1-2 times until they decide to remain closed. The temperamental nature of it is a real head-scratcher.

Any ideas what could be causing this? The photocells aren't configured at the moment but I don't believe this would be the cause.

Any help massively appreciated!

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Gate not closing	thronetm	0	163	16-11-2024, 09:25 PM Last Post: thronetm
	FAAC gates out of sync	TheDock	1	480	21-08-2024, 12:21 PM Last Post: TheDock
	Rigel 5 , gates won't open	Nameloc	4	5,556	04-05-2024, 12:41 PM Last Post: Alee
	Gates tripped	Phil.c	3	1,817	01-05-2024, 09:34 AM Last Post: Phil.c
	Came ZA3 gates stuck open	Ivorwindybottom	0	988	18-02-2024, 06:29 PM Last Post: Ivorwindybottom
	Electric Gates with AllMatic BIOS2 Unit	antsnaith	3	3,858	31-01-2024, 08:22 AM Last Post: patronsecurity
	Came gates za3p	Webby	4	10,326	07-01-2024, 07:11 PM Last Post: Simon NW
	Nice Gates not closing	StuL	1	3,222	24-08-2023, 01:34 PM Last Post: JoeF
	LIFE AC4 Closing Issues	dilbertdog	0	1,122	29-07-2023, 02:59 PM Last Post: dilbertdog
	Came gates stuck open.	Ring8180	7	20,401	23-02-2023, 01:08 PM Last Post: SamA