28-03-2018, 06:26 PM
I thought I would update the post just on the off chance someone in the future had the same problem.
After some tests and endless internet searching I now know.
1. These are BFT Phobos motors pre face lift model
2. They are powered via 230v
3. BFT compatible control box originally Rigel 5 (now obsolete) So would need a Rigel 6 but they are exspensive. I have taken a chance and ordered a universal board and receiver that comes with remotes at less than half the price of the Rigel. Touch would it works lol
4. Motor Wiring as follows
Blue - Neutral
Black - Close gates
Brown - Open gates
Green/yellow - Earth
After some tests and endless internet searching I now know.
1. These are BFT Phobos motors pre face lift model
2. They are powered via 230v
3. BFT compatible control box originally Rigel 5 (now obsolete) So would need a Rigel 6 but they are exspensive. I have taken a chance and ordered a universal board and receiver that comes with remotes at less than half the price of the Rigel. Touch would it works lol
4. Motor Wiring as follows
Blue - Neutral
Black - Close gates
Brown - Open gates
Green/yellow - Earth