27-10-2014, 03:36 PM
Hello
A push switch is usually a dry contact "no voltage" so therefore you can use either alarm cable or cat 5 cable, although u still will wont to protect it in some sort of duct to stop damage.
A push switch is usually a dry contact "no voltage" so therefore you can use either alarm cable or cat 5 cable, although u still will wont to protect it in some sort of duct to stop damage.
(11-10-2014, 02:33 PM)automatedgates Wrote: What cable do most people use for controlling gate via open/close push button if cable runs through underground duct? Would 6 core alarm cable be ok. Cable run about 20 metres.