02-08-2014, 10:55 PM
Hi all
Can anyone help me with an idiots guide to the setup options on a Came BX78 auto gate kit.
The kit is all installed and ready to go into operation but I am a little lost with the various options to set up.
I originally had the photocells connected to 2 & 3P but could not get the gate to auto close, after using 2 & C3 I am now able to get it to auto close but some of the other options seem a little vague in the user manual.
Someone must have a list of options which can be set and the individual wiring positions to achieve this.
As I see from the manual the options are 2 & 3P, 2 & C1, 2 & C3, 2 & 7.
Hope some one can help me out
Regards
chrisdobb
Can anyone help me with an idiots guide to the setup options on a Came BX78 auto gate kit.
The kit is all installed and ready to go into operation but I am a little lost with the various options to set up.
I originally had the photocells connected to 2 & 3P but could not get the gate to auto close, after using 2 & C3 I am now able to get it to auto close but some of the other options seem a little vague in the user manual.
Someone must have a list of options which can be set and the individual wiring positions to achieve this.
As I see from the manual the options are 2 & 3P, 2 & C1, 2 & C3, 2 & 7.
Hope some one can help me out
Regards
chrisdobb