BFT Icaro Wiring, photocells, safety edge
|
BFT Icaro Wiring, photocells, safety edge
|
12-01-2012, 11:32 AM
Icaro is not the best one for upgrades of safety devices. There is even no photocell test function available. Either you have to connect safety rib controller in to the photocell terminal (which is not the best solution!) or I would go (and recommend) with replacement panel. Rigel 5 would do the job, but has to be installed in separate enclosure and you have to re-wire installation.
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
BFT Icaro Wiring, photocells, safety edge - by markeymark - 30-09-2011, 10:17 PM
RE: BFT Icaro Wiring, photocells, safety edge - by Mark - 05-10-2011, 11:51 AM
RE: BFT Icaro Wiring, photocells, safety edge - by sebabastek - 12-01-2012, 11:32 AM
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
| bft 2b kit wiring | mcw1965 | 2 | 17,097 |
04-01-2021, 02:26 AM Last Post: Bobby2 |
|
| Help with bft compacta photocells | Kev132 | 0 | 3,114 |
09-12-2020, 06:49 PM Last Post: Kev132 |
|
| Altair-P gates now move in opposite direction with any change to wiring | william.helsby | 1 | 7,554 |
24-05-2020, 08:08 PM Last Post: william.helsby |
|
| Wiring Compacta photocells to Rigel 5 | rjmoore | 0 | 11,528 |
11-05-2020, 06:51 PM Last Post: rjmoore |
|
| Advice on photocells for BFT gates | weave | 1 | 6,161 |
14-04-2020, 01:34 PM Last Post: RyanB |
|
| ICARO + LEO B CBB : 12V power for keypad? | tommysharp | 5 | 24,064 |
17-02-2020, 02:24 PM Last Post: Caesium |
|
| BFT Icaro N F "ER 38" error? | diddlydonk | 3 | 29,061 |
06-09-2017, 08:24 AM Last Post: cuatudong |
|
| BFT Sub R motor wiring diagram | Qwest | 1 | 12,812 |
17-10-2016, 10:08 AM Last Post: Sav |
|
| BFT LUX GV OPENER WIRING | lawrenceiml | 2 | 16,549 |
16-06-2015, 01:30 PM Last Post: mcw1965 |
|
| BFT ICARO Autoset Fail | ybkang | 0 | 7,700 |
20-03-2015, 01:39 PM Last Post: ybkang |
|
