BFT Rigel 5 Gates won't stay open on second press

[JoeF]

Hello,

I've got a BFT Rigel 5 system. I added a remote through the control board and somehow managed to lose the function where we could keep the gate open if we double pressed the open button within a certain amount of time. I guess i must have done something on the board switching through the menus but now am unsure how we get it back?

I think the previous setting was, 1 press -> open gate -> Gate closes after 1 minute 
If Remote pressed within 1 minute gate starts to close -> press again and gate freezes at it's current position.

We do have a Daitem intercom system that can also open the gate but have not touched this, nor does it seem to freeze the gate.

Does anyone have any ideas, I know the functionality exists in our current configuration, not sure how I lost it!

Many thanks

Hi,

Thanks for the Message.

this is likely down to the logic settings, the logic settings are not set for the Step by step function.

Joe