BFT Deimos BT A600 fault Error 10

[JoeF]

I have an error 10 on BFT Deimos BT A 600. Manual states possible motor opening/closing
Contacts are seized.
Can any member advise where new relays for BFT Merak 600 can be purchased.
Relays are   WGR 24vdc.  RD - 124D - H1.      H2023J

Thanks in advance for any assistance,

Hi,

hope you are well,

unfortunately you cannot purchase this part as a spare and therefore a new control panel will need to be purchased on this occasion

Regards Joe

Hi Joe, 
Thank you for the prompt reply.
When testing resistance reading with a multimeter on the motor on BFT Deimos Ultra BT A600,
what should be the resistance reading be?
Many Thanks 
Regards Gerry

Hi, i found your message here about BFT Deimos BT A 600 ERROR 10, Can you please tell me was was the fix? since i have exactly the same error now
Thanks

Hi,

Error 10 is indicative of the following faults...

ER10
(BT motor)
Motor 1 relay running faulty test
- Motor 1 relay running control circuit failure
- Relay with stuck contacts
- Short circuit mosfet
- Check and remove the causes of possible high absorption of motor 1
- Reparation: replacement of shunt resistance, relay control circuit components, mosfet

It could be any of the following issues which may require replacing the faulty item.

Joe