Came BX-74/78

[SamA]

Hi Sam
Many thans for you input.
Yes, link between 1 & 2 has got it operating on the open command fron the remote, however I have now lost all other commands, so I now need to work out how to program in the remote buttons.
Regards
Chris

Hi Chris,

Sorry for the late response.

Please see below.

Make sure the receiver card is plugged in on the right hand side.

Press and hold the CH1 button on the bottom of the PCB until the LED flashes.

Then press and hold the button on the remote control for 3 seconds.

Please see page 18 on the manual below if you are struggling.

https://manuals.easygates.co.uk/PDF/CAME...201_EN.pdf

Sam.