Thread Rating:
  • 3 Vote(s) - 2 Average
  • 1
  • 2
  • 3
  • 4
  • 5
BfT Sub R - No Closing pressure 1 Leaf
#1
Exclamation 
Hi All, l am an engineer and am new to the BfT range. I usually only maintain CAME. However a Google client has asked for help on this issue and so l have taken a look. The BFT Sub R motor has been replaced with new as old was not working. The gates close, but one leaf looses closing pressure at the closing stage. Once the motor turns off, you can push the gate back by about a foot with no resistance! The previous installer had installed a FAAC 406 control board. Looking around this is a common issue, but l cannot find an answer! Suggestions to previous fixes?
Reply


Messages In This Thread
BfT Sub R - No Closing pressure 1 Leaf - by Bushpig - 15-01-2023, 12:53 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  BFT Sliding Gate randomly opening and closing AdrianMate 5 4,254 14-06-2024, 12:12 PM
Last Post: JoeF
  BFT Rigel 4 - single Gate Not Closing Tsnash 1 2,358 04-01-2024, 10:21 AM
Last Post: JoeF
  BFT SubR not opening/closing sometimes Jimmyboy4 3 4,267 09-01-2023, 10:29 AM
Last Post: SamA
  Gates not fully closing stefen1978@hotmail.co.uk 2 3,772 10-10-2022, 10:07 AM
Last Post: Michael
  LUX G BT 2B not closing properly since manual override swinnie 1 2,799 03-08-2022, 01:44 PM
Last Post: JoeF
  Slider closing then reopens 8" MWJONES 4 21,607 14-03-2022, 12:04 PM
Last Post: JoeF
  BFT Lux 2B FC Motor not closing all the way jc.34@outlook.com 1 3,711 07-03-2022, 11:24 AM
Last Post: JamieF
  Phobos N L BT one leaf won’t open BigJC 0 3,484 11-06-2021, 01:33 PM
Last Post: BigJC
  Phobos reversing after closing Sim75 0 2,640 21-05-2021, 07:04 AM
Last Post: Sim75
  Gates not closing (BFT Thalia btl2 and Bft Desme) Joel23M 2 8,710 17-01-2021, 01:25 PM
Last Post: Joel23M

Forum Jump:


Users browsing this thread: 1 Guest(s)