02-08-2021, 10:40 AM
Hi,
Hope you are well. It seems like the incorrect method of programming has lead to a change of settings on the system. I would recommend firstly factory resetting the gate system. Once this is done you can run through a basic learn procedure (via the spider diagram in the BFT manual). Note, you will need to find the model of PCB, as the manual for the motors wont provide a great deal of help. After learning in the basic opening angles, you will be able to choose automatic closure and set to x amount of seconds of which you would like. Remote learning will be an option at the end of learning the open and close distances (learn procedure).
If you can find out the model number of your PCB, i will be able to assist further.
Kind regards
- Jamie
Hope you are well. It seems like the incorrect method of programming has lead to a change of settings on the system. I would recommend firstly factory resetting the gate system. Once this is done you can run through a basic learn procedure (via the spider diagram in the BFT manual). Note, you will need to find the model of PCB, as the manual for the motors wont provide a great deal of help. After learning in the basic opening angles, you will be able to choose automatic closure and set to x amount of seconds of which you would like. Remote learning will be an option at the end of learning the open and close distances (learn procedure).
If you can find out the model number of your PCB, i will be able to assist further.
Kind regards
- Jamie
Gate Automation and Access Control from EasyGates Retail Store
EasyGates Trade Store for Trade only
Smart Home Tech from The Smart and Secure Centre
Smart Home News from Smart Home Matters
EasyGates Trade Store for Trade only
Smart Home Tech from The Smart and Secure Centre
Smart Home News from Smart Home Matters