30-07-2021, 06:41 PM
My wife and I have just bought a house with a set of gates driven by BFT Altair P motors. The sellers gave us two remotes and everything had been working perfectly. Gates were fully opening on command and closing about 20 seconds after passing through in either direction.
As we needed more than two remote units, I bought a couple more and a friend of my son offered to programme them from the main panel in the box on the gates.
Disaster! Not only do the new remotes not work, but the gates are not functioning properly any more. They will open part way, just about enough to drive through, but the auto close has been disabled as well. They are not opening equally either. My knowledge of such things amounts to the square root of nothing and downloading the manual hasn't enlightened me any further.
Any guidance would be extremely welcome.
Many thanks
As we needed more than two remote units, I bought a couple more and a friend of my son offered to programme them from the main panel in the box on the gates.
Disaster! Not only do the new remotes not work, but the gates are not functioning properly any more. They will open part way, just about enough to drive through, but the auto close has been disabled as well. They are not opening equally either. My knowledge of such things amounts to the square root of nothing and downloading the manual hasn't enlightened me any further.
Any guidance would be extremely welcome.
Many thanks