Mc824h hold open

[RyanB]

I have 2 toona fitted to a mc824h , pair of photo cells, comelit gate access and on2e two button remote  paired to an oxi receiver.  All working well.  I have the gates set to auto close after 3o seconds 

I would like to program the second button on the remote so I can hold the gates open over riding the auto close when I'm expecting a delivery etc. 

Can anyone advise how to do this 

Thanks

You do not need to program a second button. All that is required is to press the button you use to open a second time just before the gate is fully open at the gate stops. This will send a stop command and 'hold' the gates open until another command is sent.