I have installed the easygate under ground system for double gate with CB11 control board . The close , open photo sensors are connected to the correct pins with correct polarities . Some how the close sensers do not work .if I swope the two ie with pins 17 and 18 only pin 18 works . The voltage on pins 17 is 24v ac/dc on pin 16 is 15volts ac/dc pin 19 is 24volts ac/dc . This is a new instalation can some one help on this .The sensors are all ok . The setup procedure has been done for the photo sensors .
Electric Gates, Garage Door, Access Control, Smart Home & Security Forums
›
Gate Automation and Installation Help
›
Liftmaster Gate Openers
LiftMaster CB11 Board Photocells
LiftMaster CB11 Board Photocells
|
LiftMaster CB11 Board Photocells
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
LiftMaster CB11 Board Photocells - by inder - 01-03-2009, 07:36 PM
RE: c11 board potocells - by Mark - 17-03-2009, 03:38 PM
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
| Liftmaster MYQ Internet gateway | koen_dc | 4 | 19,329 |
05-10-2024, 01:30 PM Last Post: Arnold Pow |
|
| Liftmaster LA400 | Defender | 6 | 13,219 |
03-08-2023, 12:26 PM Last Post: Torantrieb |
|
| CB11 Multiple Keypad support | Pigsfoot | 1 | 2,754 |
12-08-2022, 08:14 AM Last Post: Michael |
|
| odd liftmaster scs300-24 | scopie88 | 3 | 14,277 |
13-04-2022, 10:20 AM Last Post: JoeF |
|
| Problem with delay time CB11 | milan | 2 | 11,733 |
04-10-2021, 01:44 AM Last Post: DesmondVog |
|
| Liftmaster MYQ Internet Gateway Registration/Connection issues! | Carmody | 0 | 14,112 |
09-03-2021, 02:46 PM Last Post: Carmody |
|
| Advice on new gate install - LIFTMASTER LYN424 | Leeb | 1 | 17,975 |
22-02-2021, 08:48 PM Last Post: russ |
|
| Adding Extra Photocells To CB22 | Onoff | 0 | 5,562 |
06-08-2020, 01:01 AM Last Post: Onoff |
|
| Liftmaster CB1 gates started to open themselves | telnet123 | 4 | 28,060 |
01-01-2020, 09:43 AM Last Post: pronosoft |
|
| chamberlain photocells | wlehane | 3 | 28,676 |
02-09-2019, 10:00 AM Last Post: Sav |
|
Users browsing this thread: 1 Guest(s)