Thread Rating:
  • 175 Vote(s) - 2.91 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Gates out of sync
#1
I have a set of double gates that are operating with the came frog system. The problem that just developed, is the gates are out of sync. The left side opens while the right side is closing. Would appreciate any help or suggestions on this senario
Reply
#2
(07-01-2018, 10:38 AM)frankjboyd Wrote: I have a set of double gates that are operating with the came frog system. The problem that just developed, is the gates are out of sync. The left side opens while the right side is closing. Would appreciate any help or suggestions on this senario

hi



that's happened probably because of cold weather .
can i know the control board type / name

is this za3 ??

regards
Best Regards 
Tom 
Automatic-TC
Reply
#3
(07-01-2018, 03:25 PM)Automatic-TC Wrote:
(07-01-2018, 10:38 AM)frankjboyd Wrote: I have a set of double gates that are operating with the came frog system. The problem that just developed, is the gates are out of sync. The left side opens while the right side is closing. Would appreciate any help or suggestions on this senario

hi



that's happened probably because of cold weather .
can i know the control board type / name

is this za3 ??

regards
Reply
#4
Hi All,
I have the same issue with my Came system where one game opens when the other closes.
One of the motors was replaced last week but is out of sync
The board is a za3
Has anyone seen this issue before?
Reply
#5
(31-12-2022, 01:31 PM)Murphe5 Wrote: Hi All,
I have the same issue with my Came system where one game opens when the other closes.
One of the motors was replaced last week but is out of sync
The board is a za3
Has anyone seen this issue before?

Issue resolved, I switched the polarity on the new motor. Working good now.
Reply
#6
(03-01-2023, 04:14 PM)Murphe5 Wrote:
(31-12-2022, 01:31 PM)Murphe5 Wrote: Hi All,
I have the same issue with my Came system where one game opens when the other closes.
One of the motors was replaced last week but is out of sync
The board is a za3
Has anyone seen this issue before?

Issue resolved, I switched the polarity on the new motor. Working good now.

Hi,

Great to hear Smile

Sam.
EasyGates.co.uk - EasyGates Ltd
 
EasyGates Direct - Trade only accounts.

Smart and Secure Center - Smart Home Products
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Gates not closing Regor23 5 1,087 03-09-2024, 12:51 PM
Last Post: Ivorwindybottom
  Came FROG-A + ZA3 controller > gates wont close safety beam endam 6 10,217 23-02-2023, 01:09 PM
Last Post: SamA
  Came Gates Error code E14 janker 3 7,940 14-11-2022, 11:59 AM
Last Post: benbrooks
  My Came ZM3E gates won’t open golfnut75 1 7,175 12-08-2022, 08:40 AM
Last Post: SamA
  ZA3 Came gates not opening with RF device chooper 5 9,326 24-06-2022, 08:58 AM
Last Post: JoeF
  Came Gates - power cut issues Paddy_SP 2 8,537 22-07-2021, 09:42 AM
Last Post: Paddy_SP
  Came Double Swing Gates opens by itself for some centimeters risp73 0 8,873 19-06-2020, 06:19 PM
Last Post: risp73
  Came gates Ring8180 1 81,851 10-07-2019, 10:39 AM
Last Post: JoeF
  Frog - ZA3: gates won't open BarryD 0 10,522 15-06-2016, 01:34 PM
Last Post: BarryD
  CAME double gates - one side closes but will not open crliving 1 18,456 02-08-2013, 09:39 AM
Last Post: Blakey111

Forum Jump:


Users browsing this thread: 1 Guest(s)