26-03-2025, 12:07 PM
When remote is pressed the gate will begin to open for around 2 seconds then stop and it will either give me Er 35, 36 or 37.
I have cleared everything within the gates path and still get the issue.
The reading that shows when the gate is moving hovers around 30-40 then shoots up to 99.99 thats when it cuts out. I have tried adjusting the force parameters but no change in results.
I have cleared everything within the gates path and still get the issue.
The reading that shows when the gate is moving hovers around 30-40 then shoots up to 99.99 thats when it cuts out. I have tried adjusting the force parameters but no change in results.