BFT BT A40 Dual Arm

[teegee]

Hello,

Gate 1 responds and opens (connections on control panel 10/11. Gate 2 will not respond (connections 14/15). On Thalia Control panel.
If I change the wiring connections from one motor to the other - on the board - then motor 2 will work, but motor 1 won't. 
So the wiring is working along the run between the two arms but both arms will not open together.
Can you help?
Thank you

[teegee]

Hello,

Any follow up on this?
Thanks

[Michael]

Hi,

This sounds to me like a possible faulty Motor output 1, Have measured the voltage from motor terminals 1?

Regards 
Mike
Easygates

[teegee]

Thank you for your reply Michael.
Both sides have just started working, in a haphazard sort of way and there is an error code 38 showing!
Will motor output 1 still require reading and how best would I do that?
Thanks again.

[JamieF]

Thank you for your reply Michael.
Both sides have just started working, in a haphazard sort of way and there is an error code 38 showing!
Will motor output 1 still require reading and how best would I do that?
Thanks again.

Hi,

What control panel are you using? If you can let me know which panel you have, I will be able to provide you with the reason for this error code showing. 

Kind regards
-Jamie