DAITEM WIRELESS INTERCOM how do I change entry code?? Help!

[Scarlett]

Hello all,

I have trawled the internet for this information as the company who installed my gates are hopeless at coming back to me now I have issues, left them multiple voicemails and now given up hope they will come back to me

I did find a guide on the web for the Daitem Wireless Intercom but the path to follow on the guide is not changing the code when I enter it?!. I'm at my wits end as I have 2 small children who have found out the code and I live near a very busy A road. So I urgently need to change the code

The system set up I have is CAME gate mechanisms on heavy iron gates, a Rosslare on the inside and the Daitem intercom on the outside of the gates , I think it is the SC902AU , but when I read the installation guide on the web it is only for the door phone.

I'm a total novice at all this and no idea where to go with this now.

PLEASE can anyone help me to change the code on the Daitem ? It would be greatly appreciated. Many thanks Scarlett

[Access-Control-Ltd]

GM Techtronics Ltd are distributors for the product they may help you.

This information is not out in general public as anyone could then find out how to change pins etc.

Mark

[Sav]

Hi Scarlett,

Could you give me a call in regards to this, i can help change the code by phone for you.

01384 569 942.

[Gagobaa]

    Using your intercom handset open the flap and scroll through the menu to delete the old code. Then scroll through again to add a code.
Stand next to the gate with your handset and when you press ok on add code it says wait.
Add the new code and done.
The manual showing how to do it all from the gate didn't work but using the handset method stood at the gate was easy.