Calypso V2 Self Installation

[leedoncaster]

Hello, I wonder if anyone could help. I purchased a pair of Calypso V2 gate openers from a seller on eBay but he is not responding to my query. I thought you may be able to advise.

I have had the gate arms fitted and they are working but they do not always stop in the same position - they gradually drift outwards. They did not come with any kind of stopper. I noticed in the manual that it says "Your gate shall be equipped with central ? and side ? stops, which are fundamental for the good system operation". I do not have a central stopper for the gates to rest onto.

Does anyone know if I need an extra bit of kit, where I might get it or if not what I should do to resolve the issue? Any advice gratefully received.

[Automatic-TC]

hi
the stoppers are realy important without them you could destroy engine gears.

advice yes why not but before i need to see your gate pictures

regards

[Sav]

Hi Lee,

Stops do not usually come supplied with gate Kits. These are usually purchased separately, as all gates come in different sizes heights etc. I would definitely advise sending some photos to info@easygates.co.uk, we can then recommend what bolt down gate stops you will require.

Hope this helps.

Hello, I wonder if anyone could help. I purchased a pair of Calypso V2 gate openers from a seller on eBay but he is not responding to my query. I thought you may be able to advise.

I have had the gate arms fitted and they are working but they do not always stop in the same position - they gradually drift outwards. They did not come with any kind of stopper. I noticed in the manual that it says "Your gate shall be equipped with central ? and side ? stops, which are fundamental for the good system operation". I do not have a central stopper for the gates to rest onto.

Does anyone know if I need an extra bit of kit, where I might get it or if not what I should do to resolve the issue? Any advice gratefully received.