SCS 300 / 24 & Viro Lock

[Guest]

Hi

I have a Viro Lock hooked up to my SCS kit. The problem is that as the lock is powered when the gates are in motion, it buzzes constantly (and very loudly!) whenever the gates are travelling (either opening or closing). Is there a way in which the lock could be energised for the first 3-4 seconds of travel only ?

Any help / advice would be very much appreciated.

Thanks
Padraig

[Mark]

There is no soloution to this the 24v system works best with magnetic locks. The Viro lock will work but with the buzzing problem you mentioned