+- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk)
+-- Forum: Remote Controls and Fobs (https://www.gateguide.co.uk/forumdisplay.php?fid=27)
+--- Forum: Programming and Cloning Help & Instructions (https://www.gateguide.co.uk/forumdisplay.php?fid=28)
+--- Thread: Beninca TO GO VA4 setup (/showthread.php?tid=7418)
Beninca TO GO VA4 setup - matthmal - 08-10-2025
Hi guys,
I have 3 different Beninca control panels, one is for the gate which is very old HCS system, and about 2 years ago I did buy 2 Beninca Control Panels which were with the ARC system. Somehow the installer of the control panels managed to switch one of the ARC system control panels to read HCS system. He gave me 2 Beninca TO GO VA4 remotes and set them as mixed, half of the remote is set to be ARC and the other half is set with HCS system, so far so good.
Lately one of my remotes is no longer working good as i dropped it several times, unfortunately i couldn't reach the installer so i bought a new and original Beninca TO GO VA4 remote from ebay. I tried to switch it to mixed by pressing the T1 and T2 buttons simultaneously but unfortunately it either flashes 1 time or else 2 times. I manage to make it work with one of the control panels that uses the ARC system but cannot make it to work with the HCS system, any ideas pls?
Regards,
Matthew