![]() |
BFT Demios A600 bAr issue - Printable Version +- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk) +-- Forum: Gate Automation and Installation Help (https://www.gateguide.co.uk/forumdisplay.php?fid=1) +--- Forum: Automatic Gates - Help and Support (https://www.gateguide.co.uk/forumdisplay.php?fid=20) +--- Thread: BFT Demios A600 bAr issue (/showthread.php?tid=7403) |
BFT Demios A600 bAr issue - Rohbot15 - 26-07-2025 hi all, I have a BFT Demios A600 and have been battling with a bAr error for several weeks, with no clear symptoms. Suddenly woke up one morning and the gate would not function. I opened the box to jump 70/71 to bypass the photocells but this didn’t work. I also tried jumping 72/73 and 74/75, with all the various combinations. This showed a STOP error, which I then tried to resolve by jumping 60/61. From this point on, I was shown Stre, irregardless of what I tried to do. I tried multiple times to go through the setup (lang, autoset etc), but the gate will not move hence it will result in KO. I should also note that only one photocell clicks, not sure if that should be the case or not? Any ideas what I can do to resolve this? I’ve returned the wiring to the original, and I’m getting the bAr error again. Photo attached (note there was a brown wire between 70/71 when I originally opened the box, which I haven’t bothered to replace). RE: BFT Demios A600 bAr issue - Rohbot15 - 26-07-2025 https://photos.app.goo.gl/FQqSDwBW4vK7Loa36 |