+- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk)
+-- Forum: Remote Controls and Fobs (https://www.gateguide.co.uk/forumdisplay.php?fid=27)
+--- Forum: Replacing broken and discontinued remotes (https://www.gateguide.co.uk/forumdisplay.php?fid=29)
+--- Thread: Programming receiver on Genius gate opener (/showthread.php?tid=7328)
Programming receiver on Genius gate opener - Nick Stone - 09-12-2024
Just replaced a Genius sliding gate controller.
Can I reprogram the new receiver card to operate from the 50+ existing fobs held by the owners of the 28 flats that use the gate?
Thanks
RE: Programming receiver on Genius gate opener - Jakedugmore - 09-01-2025
(09-12-2024, 03:27 PM)Nick Stone Wrote: Just replaced a Genius sliding gate controller.
Can I reprogram the new receiver card to operate from the 50+ existing fobs held by the owners of the 28 flats that use the gate?
Thanks
Hi Nick, If it is a hardwired receiver it can just be wired into the new Genius board, however if it is built in then you will have to program all the remotes onto the new receiver.