+- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk)
+-- Forum: Gate Automation and Installation Help (https://www.gateguide.co.uk/forumdisplay.php?fid=1)
+--- Forum: Automatic Gates - Help and Support (https://www.gateguide.co.uk/forumdisplay.php?fid=20)
+--- Thread: Allmatic Bios2 - Unlock Automotion (/showthread.php?tid=7235)
Allmatic Bios2 - Unlock Automotion - User1459 - 22-06-2024
Hi,
Currently trying to install Allmatic Bios2 and all has been wired in. Trying to do setting the wing strokes section but says on manual to unlock the motor but doesnt state where this is to be done from or how. Is this done via a command? Any help much appreciated.
Thanks
RE: Allmatic Bios2 - Unlock Automotion - Aiden Mitton - 19-07-2024
Hi,
As we do not deal with Allmatic gate automation my knowledge on this is going to be slightly limited. However, from having a quick look through the manual, when it refers to unlocking the motors and moving them to the middle stroke, this means to manually release the arms and move them to a half way position. Once you have done this lock in/engage the motors again.
I hope this was useful.
Many Thanks
Aiden